Description

The APS-RTx PowerLine Flex PL31-10K-P1-B2 is a complete extended-runtime backup power system supplied with two battery boxes, designed for critical equipment that requires continuous, conditioned power during utility interruptions.

The system combines one PL31 FL 10.0k HC 10kVA / 10kW online UPS power module with two PL31-BR20120FL battery boxes, providing increased battery capacity compared with the standard single-battery configuration.

Using online double-conversion technology, connected equipment is continuously supplied through the UPS inverter, protecting sensitive loads from voltage fluctuations, frequency instability and common utility power disturbances.

With a 1.0 output power factor, the system provides the full 10kW of usable output power from its 10kVA rating.

Its 3-phase input / single-phase output architecture makes it suitable for commercial facilities with three-phase electrical supplies but single-phase critical loads.

Each PL31-BR20120FL battery box contains 20 × 12V 9Ah maintenance-free VRLA batteries. With two battery boxes included, the system provides approximately 4.32kWh of nominal stored battery energy.

The system can also be expanded in future by adding compatible UPS power modules in parallel or additional battery capacity where higher power output or longer runtime is required.

Key Features

• 10kVA / 10kW complete UPS system
• Supplied with 2 battery boxes
• 1.0 output power factor
• Online double-conversion technology
• 3-phase input / 1-phase output
• Rack/Tower convertible design
• Pure sine-wave output
• Zero transfer time from utility to battery
• 208–478VAC three-phase input range
• 220 / 230 / 240VAC output
• Input power factor ≥0.99
• Parallel-capable UPS architecture
• Supports up to 4 power modules in parallel
• Generator compatible
• ECO operating mode
• LCD status display
• USB communication
• RS232 communication
• Intelligent communication slot
• 40 × 12V 9Ah batteries included
• 4.32kWh nominal battery capacity
• 2 × PL31-BR20120FL battery boxes
• ±120VDC battery architecture
• Extended backup capability
• Overload, short-circuit and battery protection

Typical Applications

Suitable for:

• Server rooms
• Data centres
• Banking and financial systems
• Network infrastructure
• Telecommunications equipment
• CCTV and security systems
• Access-control systems
• Communications racks
• Business-critical IT systems
• Industrial control systems
• Automation equipment
• Laboratory equipment
• Critical office infrastructure

System Technical Specifications

Included Battery System

Battery Capacity

Each battery box provides:

20 × 12V × 9Ah = 2.16kWh

With two battery boxes:

2 × 2.16kWh = 4.32kWh nominal battery capacity

Actual backup time depends on:

• Connected load
• Battery condition and age
• Ambient temperature
• Battery discharge rate
• UPS operating efficiency

This configuration is intended for applications requiring longer backup runtime than the single-battery PL31-10K-P1-B1 system.

What’s Included

UPS Power Module

1 × PL31 FL 10.0k HC

• 10kVA / 10kW
• PF1.0
• 3-phase input
• Single-phase output
• Rack/Tower
• Parallel capable

Battery Boxes

2 × PL31-BR20120FL battery boxes

• 20 × 12V 9Ah batteries per box
• 2.16kWh per box
• 4.32kWh total nominal capacity
• 3U rack enclosure each